TYM T1003 Скачать руководство пользователя страница 60

Страница: 60 / 130

Connecting

Disconnecting

►

DRIVING DOWNHILL

Use the engine’s ability to brake when traveling downhill.

Never rely on the brakes only and never travel downhill with the gears in neutral.

When operating in hilly terrain the risk of the rollover is increased substantially,

please drive with extra care.

When towing trailers in hilly terrain ensure that they are equipped with brakes, use

a lower gear to get maximum engine braking and do not change gears on a down

hill run

Caution

►

OPERATION OF THE DIFF LOCK

While the diff lock is a very useful feature, care should be taken in its use as misuse can lead to dangerous

►

UPHILL STARTS ON A STEEP SLOPE

With the pedals connected together push down on the brake

pedals and push down the clutch.

Set all gear levers to low and the throttle to medium engine speed.

Release the clutch and as it engages release the brake pedals.

Adjust the throttle to the required speed.

situations.

The diff lock would only be used in situations where traction is lost on one of the rear wheels.

Use low engine revolutions when using the diff lock.

If the diff lock does not release after removing the foot from the pedal use the left

and right brake pedals in turn to release it.

Do not try to engage or use the diff lock on tight turns as serious damage can result.

Warning

►

CHECK DURING DRIVING

Constantly monitor the warning lights on the dash and if any comes on stop

the tractor to determine the cause.

If the oil pressure light comes on check the oil level first of all.If the oil

level is OK ask a qualified dealer to check the reason for the light coming on.

If the alternator warning light comes on check all connections and ensure

that the fan belt is not broken.

If all connections and the fan belt are intact consult your dealer to determine

the cause of the problem.

Содержание T1003



































































































































Результаты поиска

Содержание T1003

Отзывы:

Бренды по названию

Популярные бренды

TYM T1003, Руководство оператора

Результаты поиска

Содержание T1003

Отзывы:

Бренды по названию

Популярные бренды