Short bench (
Box
2):
•
Rest the bench upright against the back wall panel.
•
Connect the S-2 electrical supply to the S-2 junction box.
•
Fix the cover of the S-2 junction box with 2 Phillips screws.
•
Lay the bench down and push first the right hand and then the left hand edge into position.
•
Push the seat onto the back wall panel.
Front wall panel:
•
Place the left hand glass section into the floor slot and the slot in the left hand wooden panel.
•
Note: The long loop on the seal should be on the inside of the two fixed panels.
•
Place the right hand glass section into the floor slot and the slot in the right hand wooden panel.
Page 8
