Control panel instructions:
Main current:
Press
POWER
to turn the sauna
ON (AN)
or
OFF (AUS).
If a red
light comes on the sauna
is
ON
. If it is white the sauna is
OFF.
Timer functions:
Press and hold down
or
in order to set the running time. You can also run
your finger up or down the timer to set it.
Timer 2:
Use this function with a pre-setting of up to 24 hours to set the sauna to come on later.
Temperature functions:
1. Press to switch between
C
and
F
. C or F will light up to show the required units.
2. Press and hold
or
to set the required temperature.
Pressing once will increase or reduce the setting in one degree intervals. You can also run your finger
over the temperature bar.
The central temperature display shows the actual sauna temperature.
3. Press to set the
bench/ leg/ floor heat to
ON
or
OFF.
Red waves can be seen in heating mode
and white ones in
OFF
mode.
Light functions
:
1. Press Inside light to switch it
ON
or
OFF
.
Note: Outside light
ON
or
OFF
will not work with S series models.
Colour therapy functions:
Press the colour therapy light in order to activate coloured light or a colour sequence. The sequence
is shown in detail below:
1. Press – RED
2. Press – RED-GREEN
3. Press – GREEN
Page 12
