background image

4.  Press – BLUE-GREEN 

5.  Press – BLUE 

6. 

 

Press – BLUE-RED 

7. 

 

Press – BLUE-RED-GREEN 

8. 

 

Press – Activates the full rotation of all the 7 aforementioned colour therapies one after the other. 

9. 

 

Press – Turns the colour therapy functions OFF.  

Note: The colour of the light is indicated by the waves around the bulb symbol. 

 

 

 

How to operate the radio and MP3 player  

Press the radio icon 

 to switch to radio mode. 

Internal reception (only FM) varies. You can use USB, 

micro SD or audio cable for MP3. You will have to use 

an audio cable from your device for Apple products.  

Loudspeakers are hidden sound generators. Some MP3 

versions or other audio files can't be played back in the 

USB or micro SD slot.

 

Troubleshooting tips: 

a. Main control panel lights not lit up: 

Check the electrical connections between the ceiling and the back wall panel and the front wall panel. 

Ensure that the plug is correctly connected to the socket and the switch. 

Ensure that the main switch (house) is not switched off (socket has power). 

Ensure that the main control switch (under the bench) is not switched off and is ON.

 

b. The sauna does not heat up: 

Ensure that the power cable is correctly inserted into the socket. 

Ensure that all junction boxes are correctly connected under the bench as shown 

in the junction box connection code in 4a. 

Ensure that the main switch (house) is not switched off (socket has power). 

Ensure that the main control switch (under the bench) is not switched off and is ON.

 

Ensure that the required temperature is higher than the actual sauna temperature.  

(Control needs heat) 

------------------------------------------------------------------------------------------- 

 

 

Page 13 

 

Содержание Prime+ 1515/C















Отзывы: