manualshive.com logo in svg

TYCROP ProPass 180, Руководство оператора

Поделиться
Скачать
TYCROP ProPass 180 Скачать руководство пользователя страница 44

TYCROP Manufacturing Ltd.  

 

ProPass 180 Top Dresser Operator’s Manual  

Twin Spinner Spread Pattern 
Troubleshooting Guide 

2.

 

Replace all worn spinner disks or paddles. 

3.

 

Test the spread pattern. 

If you are having problems with the ProPass spread 
pattern: 

4.

 

Use the following troubleshooting guide to make 
small adjustments and refine the spread pattern. 

1.

 

Adjust the ProPass and the Twin Spinner attachment 
to the factory recommended settings  (See Page 26) 

5.

 

If you are still having problems with the spread 
pattern, contact an authorized TYCROP distributor. 

 

Spread Pattern 

Adjustment 

Next Step 

Heavy in the middle 

Slowing the Twin Spinner speed may help 
throw the spread pattern more to the 
outside. 

Loosen the adjustment handle and slide the 
base of the twin spinner towards the 
ProPass 3 to 6.5 mm (1/8 to 1/4 inch).  Test 
the spread pattern.   

Keep repeating this step until the spread pattern 
is acceptable.  

If the spread pattern is still not acceptable, 
contact an authorized TYCROP distributor for 
additional adjustment procedures.  

Heavy to the outside 

Loosen the adjustment handle and slide the 
base of the twin spinner away from the 
ProPass 3 to 6.5 mm (1/8 to 1/4 inch). Test 
the spread pattern. 

Keep repeating this step until the spread pattern 
is acceptable.  

If the spread pattern is still not acceptable, 
contact an authorized TYCROP distributor for 
additional adjustment procedures.  

 

Towards the ProPass

Away from the ProPass 

 

Figure 32: Medium Spread settings (arrows indicate direction of travel to change the spread pattern) 

Page 37 

 

Troubleshooting 

Содержание ProPass 180













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды