manualshive.com logo in svg

TYCROP ProPass 180, Руководство оператора

Поделиться
Скачать
TYCROP ProPass 180 Скачать руководство пользователя страница 28

TYCROP Manufacturing Ltd.  

 

ProPass 180 Top Dresser Operator’s Manual  

How to Load the ProPass 

Load the ProPass with a front-end loader, or use a larger 
material handler designed to load material into the ProPass 
hopper.  

If sacks of material are being used, empty the sacks into 
the loader’s bucket before loading the material into the 
hopper. To ensure stability, distribute the load evenly, 
front to back and side to side.

 

How to Operate the Controls and 
Attachments 

 

W

ARNING

:

 

Before operating the ProPass, 

read and understand the entire Operator’s 
Manual and all safety decals.  

Flow Control Valve for Conveyor Belt 

A hydraulic flow control valve controls the speed of the 
conveyor belt. To unload the ProPass quickly, set the flow 
control valve to the highest setting of 10. To stop the 
conveyor belt, set it to the lowest setting.  

Flow Control Valve for Attachment 

A hydraulic flow control valve controls the speed of the 
attachment (Vortex Brush or Twin Spinner). The highest 
speed setting is 10. Use a lower setting for applications 
that require slower speeds.  

 

W

ARNING

:

 

Do not leave the ProPass 

unattended while it is running. 
  

On/Off Pendant 

Use the two switches on the on/off pendant to run the 
conveyor belt or the attachment (Figure 18). The on/off 
pendant is kept within reach of the operator. 

 

Figure 18: On/off pendant 

How to Operate the ProPass 

1.

 

Fill the ProPass hopper with the material to be spread. 

2.

 

Adjust the gate height to the preferred setting. (See the 
ProPass Factory-Recommended Settings Guide on 
page 25). 

3.

 

Adjust both flow control valves to the preferred 
setting. (See the ProPass Factory-Recommended 
Settings Guide on page 25). 

4.

 

Park the tow vehicle 3 m (10 ft) in front of the area 
required for top dressing. 

5.

 

Ensure that the on/off pendant switches are both off.  

6.

 

Ensure that the tow vehicle’s engine is at a low r/min 
(revolutions per minute). Engage the tow vehicle’s 
hydraulics. 

7.

 

Turn the attachment on, using the on/off pendant. 

8.

 

Drive forward to the area that requires top dressing, 
raising the r/min of the tow vehicle to the optimal 
operating range.  

9.

 

When the ProPass attachment is directly over the 
beginning of the top dressing area, use the on/off 
pendant to turn on the conveyer belt. 

10.

 

Travel in a straight line and spread the material at a 
constant speed until the spread reaches the edge of the 
top dressing area.  

11.

 

Turn off the conveyor belt, turn the ProPass around, 
and position it for the next pass.  

12.

 

Before making the next pass, check the spread pattern 
on the ground. Adjust the ProPass settings if 
necessary.  

13.

 

Continue steps 8 to 11 until the entire area requiring 
top dressing has been completed, or the hopper is 
empty. 

14.

 

Turn off the conveyor belt and the attachment, lower 
the tow vehicle’s r/min, and disengage the hydraulics. 

I

MPORTANT

:

 

Never leave the on/off pendant on when 

the ProPass is not in use. Otherwise, the tow vehicle’s 
battery may discharge. 

Page 24 

 

Operating Instructions 

Содержание ProPass 180













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды