GLOBAL HEADQUARTERS | 1400 Pennbrook Parkway, Lansdale, PA 19446 | Tel1-215-362-0700
TFP480
Page 12 of 12
Copyright © 2014 Tyco Fire Products, LP. All rights reserved.
•
MODE 8: POSITION 1 for On Until Si-
lenced NAC Operation
•
MODE 9: POSITION 2 for Superviso-
ry Latching
•
MODE 10: POSITION 3 for Standard
(LED-Piezo) Supervisory Notification
Step 4.
If a POSITION must be correct-
ed for a given MODE number, press the
SYSTEM RESET KEY to scroll through
the positions. When at the correct po-
sition, press the ACCEPT SIGNAL KEY
to confirm a selection and scroll to the
next MODE number.
Step 5.
Upon completing the program-
ming check, place the PROGRAM
SWITCH in the OFF position, and then
return the Operator Interface card to its
normal position.
NOTICE
Exercise care to ensure that all MODES
are restored to their proper settings.
Ordering
Procedure
Contact your local distributor for avail-
ability. When placing an order, indicate
the full product name, including de-
scription and Part Number (P/N).
Model RCP-1 Panel
Specify: (size) Model RCP-1 Residential
Control Panel and P/N (specify):
1 Inch . . . . . . . . . . . . . . 52-310-2-601
1-1/2 Inch . . . . . . . . . . . 52-310-2-602
Separately Ordered Parts
Specify: Bezel for use with the Model
RCP-1 Residential Control Panel,
P/N 52-310-2-603
Replacement Parts
Specify: 8.0 Amp Batteries BT-80
for use with the Model RCP-1
Residential Control Panel,
P/N 2656
