Tyco iSTAR eX, Руководство по установке и настройке

Страница: 99 / 232

Connecting AC Power to UL Recognized ESD Power Supply
iSTAR eX Installation and Configuration Guide 4–13
Grounding Procedure
To ground the iSTAR eX, refer to Figure 4.7 and perform these steps:
1. Connect the incoming ground wire (green or green/yellow) to the ground
lug as shown in point A.
2. Connect the ground input of the ESD power supply to the ground lug as
shown in point A.
3. Be sure the door is also grounded as shown in point B.
iSTAR eX Power Supply Layout - Standard and NPS Versions
Standard Version Power Supply Layout
Figure 4.8 shows the connections of the standard power supply and battery to
the PMB on the iSTAR eX. The GCM is powered from the PMB. Figure 4.8
does not apply to the NPS version.
NPS Version Layout (External Power Supply)
Figure 4.9 shows the connections from a UL 603 Listed, power-limited power
supply with appropriate ratings and a minimum 4 hours of standby power to
the PMB on the iSTAR eX. The GCM is powered from the PMB.