MDE142E0
37/60
06/04/04
10.4. Maintenance routines
Alarm log
The alarm log routine allows visualising the list of the last 5 alarms and 5 warnings and the data when they occurred.
The “clear alarm log” routine of the
set-up menu
should be used to clear the list.
View procedure:
•
Move the local selector to OFF and then press simultaneously OPEN and STOP. Select the language according to
the instructions “entering the view mode”. When the message of display is “VIEW MODE OK?” press YES. Press
NO to scroll the list of available menus and press YES to select
maintenance
menu.
•
Press YES to answer at the message “
alarm log view
? ” and select alarm log routine.
•
Press YES to scroll the list of alarms
•
Press NO to answer at the message “
alarm log view
? ” and then YES to scroll the list of warnings.
Operating log
The operation log is made of different counters and routines that provide information to assist in the maintenance
program. The data are grouped in 2 families:
general data
and
recent data
. The general data log collects data from
"test date" to "present date". The recent data log collects data from the last "clear recent data log" date, to "present
date".
GENERAL DATA LOG
RECENT DATA LOG
•
pump starts
•
pump operating time (hours)
•
time without supply (hours)
•
utilisation rate (%)
•
recent pump starts
•
recent pump operating time (hours)
•
recent time without supply (hours)
•
recent utilisation rate (%)
View procedure:
•
Move the local selector to OFF and then press simultaneously OPEN and STOP. Select the language according to
the instructions “entering the view mode”. When the message of display is “VIEW MODE OK?” press YES. Press
NO to scroll the list of available menus and press YES to select
maintenance
menu.
•
Press NO to scroll the list of available routines and press YES to select
operation log
.
•
Press YES to select
general data
or press NO to skip to
recent data
•
Press YES to scroll the list of values.
•
Press YES to view the
recent data
log or press NO to exit
•
Press YES to scroll the list of values.
Maintenance date
The routine allows seeing the following date:
Ø
last maintenance date
Ø
next maintenance date
Ø
date of the last “clear recent data log “.
Ø
start-up date
View procedure:
•
Move the local selector to OFF and then press simultaneously OPEN and STOP. Select the language according to
the instructions “entering the view mode”. When the message of display is “VIEW MODE OK?” press YES. Press
NO to scroll the list of available menus and press YES to select
maintenance
menu.
•
Press NO to scroll the list of available routines and press YES to select
maintenance date
routine.
•
Press YES to scroll the list of date
