Page 11 / 14 ECOC: EGC0 ; LOC: AI
P/N 825582-1
411-18530 Rev A
2.3 Notes on service and maintenance
This instruction sheet describes the use and the operating of the Crimping Hand Tool
P/N 825582-1 for application with plug-in-sleeves without insulation sleeve as well as necessary
maintenance measures.
For further information and for technical assistance, please contact:
Kundendienst
Ampèrestraße 12-14
D-64625 Bensheim
3 Application
The crimping tool enabeles a high-quality stripping and dismantling of all insulation cable connections
for wire sizes: red: 0,5 - 1,0mm²; blue: 1,5 – 2,0 mm²; yellow: 4,0 – 6,0 mm²
NOTE
Dimensions on this sheet are in millimeters “mm”. Figures and illustrations are not drawn to scale.
PROPER USE GUIDELINES
Cumulative trauma disorders can result from a prolonged use of manually powered hand tools. Hand
tools are intended for occasional use and low volume applications. For extended use or production
operations, Tyco Electronics offers a wide selection of powered application equipment.
NOTE
The hand tool may only be used for the described purpose!
SECURITY ADVICE !
Do not reach into the blade area! Danger of injury!
Remove stripping remainders with a tool, for example with a small screw driver.
