8 Port SNMP Managed Switch – User Manual
Page
6
All LED indicators are located on the front panel of the 8 Port SNMP Managed Switch and
provide a real-time indication of switch and operational status. The following table details the
LED states:-
LED
Status
Description
Green Power
On
PWR
Off
Power is Off.
Green
The port is operating at the speed of 100Mbps.
10/100
Off
No device is attached or in 10Mbps mode
Green
The port is connected to an Ethernet device.
Blinks
The port is receiving or transmitting data
LK/ACT
Off
No device is attached
Orange The port is operating in Full-duplex mode
Blinks
Collision of packets is occurring on the port
FD/COL
Off
No device is attached or the port is in half-duplex mode
Figure 4. Descriptions of LED Indicators
Rear Panel
The 3-pronged power socket and the On/Off switch are located at the rear panel of the switch.
The switch operates over the range 100-240V AC, 50-60Hz without adjustment.
Console Port
The switch can be fully managed using the console port providing a direct connection between
the switch and an end station such as a PC via the supplied RS-232 cable. See page 12 for
details.
Figure 5. The Rear Panel of the 8 Port SNMP Managed Switch
Product Number 0-15910xx-x
© Tyco Electronics 2004
PL0357 Issue A
