TYAN Tomcat i7221 S5150 Скачать руководство пользователя страница 68

Страница: 68 / 110

Tomcat i7221 S5150

Chapter 4: SATA/RAID Setup (for SATA RAID model)

4-7

http://www.tyan.com

6. Press the <Enter> key to create the specified volume and the following prompt will appear:

Press "ENTER" to Create the specified volume.

Intel (R) Application Accelerator RAID Option ROM v4.0.0.6211
Copyright (C) 2003-04 Intel Corporation. All Rights Reserved.

[ ]Change [TAB]-Next [ESC]-Previous Menu [ENTER]-Select

HELP

[ ]

CREATE VOLUME MENU

[ ]

                    Name:   RAID_Volume0
          RAID Level:   RAID0(Stripe)
                    Disks:   Select Disks
             Strip Size:  128KB
              Capacity:   68.9   GB

                                 Create Volume

WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST.

Are you sure you want to create this volume? (Y/N):

7. Confirm this selection by pressing the <Y> key after the prompt. The window will be

returned to the main menu with an updated status similar to the following:

RAID Volumes:
ID Name Level Strip Size Status Bootable

0 RAID_Volume0 RAID0(Stripe) 128KB 68.9GB Normal Yes

Physical Disks:

Port Drive Model                   Serial #
0      WDC WD360CD-00FN   WD-WMAH91105870
3      WDC WD360CD-00FN   WD-WMAH91063877

Size Type/Status(Vol ID)
34.4GB

34.4GB

Member Disk (0)
Member Disk (0)

Intel (R) Application Accelerator RAID Option ROM v4.0.0.6211
Copyright (C) 2003-04 Intel Corporation. All Rights Reserved.

[ ]-Select [ESC]-Exit [ENTER]-Select Menu

DISK/VOLUME INFORMATION

[ ]

MAIN MENU

[ ]

1. Create RAID Volume

2.   Delete RAID Volume
3.   Reset Disks to Non-RAID
4.   Exit

Note

The disk/volume information listed for your system can differ from the
following example.

Содержание Tomcat i7221 S5150















































































































Результаты поиска

Содержание Tomcat i7221 S5150

Отзывы:

Похожие инструкции для Tomcat i7221 S5150

Бренды по названию

Популярные бренды

TYAN Tomcat i7221 S5150, Руководство пользователя

Результаты поиска

Содержание Tomcat i7221 S5150

Отзывы:

Похожие инструкции для Tomcat i7221 S5150

Бренды по названию

Популярные бренды