24
http://www.tyan.com
3.4 – Keyboard Configuration screen
Options related to keyboard setup can be altered in this section.
Boot up Num -Lock
Auto
On
Off
Toggles the Num-lock keyboard function to be
turned on at startup or be disabled at startup.
Keyboard auto-repeat
rate
30/sec
26.7/sec
21.8/sec
18.5/sec
13.3/sec
10/sec
6/sec
2/sec
Defines the rate at which characters are
repeated on screen when holding down keys on
the keyboard.
Keyboard auto-repeat
delay
1/4 sec
1/2 sec
3/4 sec
1 sec
Defines the delay when holding down a key
before characters begin to repeat.
KB error
This option toggles whether the system will pause if a keyboard error
is detected or continue to boot.
3.5 – I/O Configuration
Options related to I/O setup can be altered in this section.
PS/2 Mouse
Toggles the PS/2 mouse port. Enabled will use system resources.
Floppy disk controller
Toggles the onboard floppy disk controller. Leave as Enabled or set
to Auto if you plan to use a floppy disk drive.
3.6 – PCI Configuration
Options related to PCI slot features can be altered in this section.
Primary Video
Defines which slots the system will attempt to initiate video on first.
PCI Device, Slot 1 (..2, 3,
4, 5)
Option ROM
Scan
Enables or disables device expansion ROM.
PCI Device, Slot 1 (..2, 3,
4, 5)
Enable Master
Enables or disables PCI bus mastering. Not
every device can operate as a PCI master.
However, PCI bus mastering allows devices that
can, to access other devices on the PCI bus
directly for increased performance.
PCI Device, Slot 1 (..2, 3,
4, 5)
Latency Timer
Defines the PCI response time delay. Certain
devices such as sound cards, which require the
most PCI access time, may benefit from a
higher latency time.
3.7 – PCI/PnP IRQ Exclusion
Options related to PCI/PnP interrupts can be altered in this section.
IRQ (.. 4, 5, 7, 10, 11)
Available
Reserved
Defines IRQ availability for device use.
