10
http://www.tyan.com
2.9 – Chassis Intrusion header (J90)
1
2
This header allows you to connect a chassis intrus ion mechanism that turns on an alarm
or in certain cases, prevents the computer from being started. This feature is only found
on certain types of server or high end workstation class chassis and is usually only
accessible through server management software.
2.10 – Front Panel LAN Activity LED (J95)
1
2
Use this header to connect a front panel chassis LED that will light up upon LAN
activity.
2.11 – Drive Power (J98)
This Auxiliary drive power connector is a standard 4-pin ATX drive connector. You may use any
corresponding drive power connector for J98. It is recommended that you use this connector if you
do not have an ATX12V power supply which uses a square 4-pin 12V connector.
NOTE
The S2466 Tiger MPX auxiliary drive power connector must be independent of
any other devices. A device such as a DVD/CD-ROM drive, hard drive, or any
other devices cannot be attached onto the same power line. If connected, system
stability is compromised.
TIP:
Connecting all three power connectors (the 20-pin ATX, 4-pin Auxiliary and 4-pin ATX12V )
will not damage the motherboard and the system will operate normally, however connecting all
three is not necessary.
2.12 – FAN connectors
FANs 1 to 4 are used for chassis cooling while P1FAN and P2 FAN are used to attach processor
fans. To ensure safe and reliable operation, do not mix and match chassis fans connectors with
the P1FAN/P2FAN connectors.
