23
http://www.tyan.com
(Advanced Setup continued)
Base I/O
3F8, 2F8
3E8, 2E8
These options are dependant on the IRQ
settings below and vice versa. They set the I/O
address for the serial ports.
Interrupt
IRQ3
IRQ4
These options are dependant on the Base I/O
settings and vice versa. They set the IRQ for the
serial ports.
Parallel Port
Enabled
Disabled
Auto
Toggles the Parallel Port. Use this port for
devices such as printers or Zip drives.
Mode
Defines the mode that the Parallel port will operate in. Leave on
default setting for most compatibility.
Base I/O
These options appear when the Parallel Port is enabled and allows
you to set the Base I/O address.
Interrupt
IRQ5
IRQ7
These options appear when the Parallel Port is
enabled.
DMA Channel
Enabled
Disabled
Auto
Toggles the Parallel Port. Use this port for
devices such as printers or Zip drives.
Boot-time diagnostics
Screen
This option toggles the diagnostics screen that appears during
bootup.
Summary Screen
This option toggles the boot summary screen before OS load.
CPU SDRAM Frequency
This option allows you to set the operating frequency of system
memory. Leave as default for best stability.
Console Redirect
This option allows you to pass the display console through a LAN for
control on another computer.
3.3 – Chipset Configuration
Options such as graphics and memory settings can be altered in this section.
Graphics Aperture
32MB
64MB
128MB
256MB
512MB
1GB
None
Defines the size of system memory reserved
for AGP graphics data such as textures.
Usually, the higher the setting, the better
AGP performance, regardless of how much
actual RAM you have installed on your
motherboard.
SERR Signal Condition
None
Single bit
Multiple bits
Both
Toggles the ERR signal in the listed
conditions. Leave at default setting.
ECC Config
Disabled
EC (Single bit)
ECC (multiple bits)
ECC Scrub
Toggles memory correction.
EC – Error checking and status reporting
enabled. Data is not corrected.
ECC – EC but data is corrected.
ECC Scrub – ECC with memory contents
corrected after all reads with errors.
