8
http://www.tyan.com
2.1: Board Jumpers
2.2 Front Panel Connector (J12)
Your chassis will usually come with connectors to install onto the motherboard, such as HDD and
Power LEDs. The Front Panel Connector (J12) has been implemented for such purposes.
2.3 – CMOS Reset (J21)
1
2
3
1,2: Default
2,3: Connect pins 2 and 3 together to reset the CMOS settings in case an incorrect
setting causes system instability or you have forgotten your system/setup password
of have just flashed your BIOS.
Power off the system and disconnect the power supply from the motherboard.
- Close pins 2 and 3 on J21
- Wait about 5 seconds
- Close pins 1 and 2 on J21
- Reconnect the power supply and pow er on the system
