SySTIUM
®
TECHNOLOGIES
MotherBoard Ready
SM
System
•
MODEL 730
Copyright © 2013, SySTIUM® Technologies, LLC
PN: 91321-01 Rev01
1
USER QUICK START GUIDE
350W version
NOTE
The cord must be less than 14.8 feet (4.5 meters) long and, for
use in Europe, be created with <HAR> (harmonized) or VDE
certified cordage.
The connector at the product end must be an IEC 320, sheet
C13, female connector (or the equivalent EN 60 320 connector).
The AC plug end must be terminated in a grounding-type male
plug designed for use in your region. The plug ends must be
labeled or marked to indicate they have been certified by an
agency acceptable in your region.
The cord must be rated for use at the AC voltage available, with
a current rating that is at least 125% of the current rating of the
product.
In some cases, the power cord supplied with this system may not
be compatible with the AC wall outlet in your region. If this is
true, you must obtain a suitable power cord that meets the
following criteria:
Do not attempt to modify or use the supplied AC power cord if it
is not the exact type required.
Warning
Power Cord Replacement
The power supply voltage standby circuit is active when the
computer is turned off. Ensure that the computer is disconnected
from its power source and from all telecommunications links,
networks, or modem lines whenever the chassis cover is removed.
Do not operate the computer with the cover removed.
Warning
Check that the power cord supplied is designed and approved for
power connections. If you are unsure of the power cords
suitability, check with the safety approval agency in your region of
the world. If the power cable supplied is not suitable please
review the instructions in the section “Power Cord Replacement”.
Before connecting the power cord to the system make sure the
power supply is set for the correct voltage operating range for
your region. Refer to the enclosed diagram of the specific Model
730 and motherboard combination for the location and
instructions for setting the computer system’s operating voltage
setting.
All of the external peripheral cables are designed such that the
connector can only be inserted in one orientation. Check the
orientation of the connector if the cable will not connect easily.
Connect the peripherals (Keyboard, Mouse, Video, etc.) required
for correct operation of the computer system. Refer to the
enclosed diagram of the specific Model 730 and motherboard
combination for the location and function of the various peripheral
connectors on the system. If you are unsure what model of
motherboard is installed, then locate the diagram that matches
the system. The function of the connectors is standard for
different motherboards.
Product Safety Warnings
CAUTION
TO PREVENT ACCESS TO HIGH ELECTRICAL
ENERGY PARTS, DO NOT REMOVE THE TOP
COVER.
WARNING
Ensure that the computer is disconnected from its power source
and from all telecommunications links, networks, or modem lines
whenever the chassis cover is removed. Do not operate the
computer with the cover removed.
AVERTISSEMENT
Assurez vous que le système soit débranché de son alimentation
ainsi que de toutes les liaisons de télécomunication, des réseaux,
et des lignes de modem avant d’enlever le capot. Ne pas utiliser
le système quand le capot est enlevé.
WARNUNG
Das System darf weder an eine Stromquelle angeschlossen sein
noch eine Verbindung mit einer Telekommunikationseinrichtung,
einem Netzwerk oder einer Modem-Leitung haben, wenn die
Gehäuseabdeckung entfernt wird. Nehmen Sie das System nicht
ohne die Abdeckung in Betrieb.
AVVERTENZA
Prima di rimuovere il coperchio del telaio, assicurarsi che il
sistema sia scollegato dall’alimentazione, da tutti i collegamenti
di comunicazione, reti o linee di modem. Non avviare il sistema
senza aver prima messo a posto il coperchio.
ADVERTENCIAS
Asegúrese de que cada vez que se quite la cubierta del chasis, el
sistema haya sido desconectado de la red de alimentación y de
todos lo enlaces de telecomunicaciones, de red y de líneas de
módem. No ponga en funcionamiento el sistema mientras la
cubierta esté quitada.
Connect the Peripheral & Power Cables
