manualshive.com logo in svg

TYAN THUNDER X, Руководство пользователя

Поделиться
Скачать
TYAN THUNDER X Скачать руководство пользователя страница 98

http://www.tyan.com

C-4

Appendix C

Glossary

EDO RAM

 (Extended Data-Out RAM) speeds access to memory locations

by assuming that memory addresses are static: the next time it looks for a bit of
data, it will be at the same spot, or one nearby.

EEPROM

 Electrically Erasable Programmable ROM, also called Flash BIOS,

is a ROM chip which can, unlike normal ROM, be updated. This allows you to
keep up with changes in the BIOS programs without having to buy a new chip.
TYAN’s BIOS updates can be found at http://www.tyan.com/html/drivers.html

ESCD

 (Extended System Configuration Data) is a format for storing informa-

tion about Plug and Play devices in the system BIOS. This information helps
properly configure the system each time it boots.

Firmware

 is low level software that controls the system hardware.

Form factor

 is an industry term for the size, shape, power supply type, and

external connector type of the PCB (personal computer board) or motherboard.
The standard form factors are the AT and ATX, although TYAN also makes
some Baby-AT boards.

 A 

Global timer

 is an onboard hardware timer, such as the Real Time Clock.

Handshaking 

is a form of encryption. One system, typically the server,

sends an encryption scheme to another agent, typically a client. Thus, the
client’s data is protected during transmittal to the server.

HDD

 stands for Hard Disk Drive.

H-SYNC

 controls the horizontal properties of the monitor.

IC

 (Integrated Circuit) is the formal name for the computer chip.

IDE

 Integrated Device (or Drive) Electronics is a simple, self-contained hard

drive interface. It can handle drives up to 8.4GB in size. Almost all IDEs sold
now are in fact Enhanced IDEs (EIDEs).

IDE INT

 (IDE Interrupt) is a hardware interrupt signal that goes to the IDE.

Содержание THUNDER X








































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды