manualshive.com logo in svg

TYAN THUNDER X, Руководство пользователя

Поделиться
Скачать
TYAN THUNDER X Скачать руководство пользователя страница 92

http://www.tyan.com

B-8

Appendix B

Adaptec Ultra2 LVD SCSI

supplying termination at the other end of the bus is shut down.  To enable
onboard termination on Channel A, set jumper JP22 to the ON position.  To
enable onboard termination on Channel B, set jumper JP23 to the ON position.
The default setting for both jumpers is the OFF position.  The OFF position
allows for the hardware to set the termination automatically.  The ON position
forces devices to be terminated ALWAYS.

5. Installing AIC7896 SCSI Software

To install the AIC7896 SCSI software (drivers), go to the section below for the
operating system installed on your computer (for example, Computers with
Windows 95/98).  If the operating system is not yet installed, install it now.
Refer to your operating system documentation for instructions.

     NOTE:  If you have installed a new SCSI hard drive in a computer running
     Windows or DOS, you must partition and format the drive with the DOS
     FDISK and FORMAT commands before it can be used.  Refer to your
     Windows and DOS documentation for instructions.

Computers with Windows 95 / 98 Installed

     STEP 1:  Turn on all external peripherals and then the computer.  Windows
     95 /98 will ask you to select which driver you want to install.

     STEP 2:  Select “Driver from disk provided by hardware manufacturer,”
     then click OK.

     STEP 3:  Insert the 7800 Family Manager Set setup diskette in your floppy
     disk drive, then click OK.

     STEP 4:  Follow the instructions that appear onscreen.

Computers with Windows NT Installed

     STEP 1: Turn on all external  peripherals and then the computer.

     STEP 2:  Start Windows NT on your computer.

!!!!!

important!

Содержание THUNDER X








































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды