TYAN THUNDER X, Руководство пользователя

Страница: 32 / 103

http://www.tyan.com
2-22
Chapter 2
Board Installation
2.7 Power Supply Installation
Connecting the Power Supply
Tyan recommends using an ATX power supply that
conforms to industry standard revision 2.01. The
Thunder X motherboard comes equipped with two
onboard power connectors. This allows the option of
using two power supplies in order to distribute the
load created by any number of devices that you may
have in your system.
Figure 2-17 shows an ATX power connector. When
plugging in the power connector, make sure that the
plastic clip on the power connector is aligned with
the plastic tab on the onboard connector (see Figure
2-18 below).
Make certain that you do not miss any pins because if you do, you will void
your warranty and cause damage to yourself or your motherboard when you
turn the system on. After connecting the power, make sure the connector is
seated firmly into its socket so it will not become loose or fall off when the
computer is jostled or moved.
Figure 2-17
Figure 2-18
warning