TYAN S2505T Скачать руководство пользователя страница 6

Страница: 6 / 57

http://www.tyan.com

1.2 Hardware Specifications

Dual Universal PGA370 ZIF Sockets
Intel Pentium III (FC-PGA) 500MHz - 1.13GHz+
Celeron (single socket configuration only) FC-PGA
Onboard VRM 8.5 spec
Front side bus support for 100 or 133MHz

Five 32-bit PCI v2.2 compliant slots
One ISA slot
Total six usable slots

VIA Apollo Pro133T chipset
(VT82C694T and VT82C686B)

Integrated hardware monitoring
3-pin Fan Monitoring headers
Temperature and Voltage Monitoring
3-pin Wake-on-Ring header
3-pin Wake-on-LAN header

One floppy connector for up to two drives
Two 9-pin UART serial ports
One 25-pin ECP/EPP parallel port
Four USB ports

(two ports via cable - optional*^)

PS/2 mouse and keyboard ports

Four 168-pin 3.3V DIMM sockets

Supports 1.5GB of 66/100/133MHz types of memory.

Supports both buffered/unbuffered PC100/133 SDRAM

Expansion Slots

Chipset Information

Hardware Monitoring

Memor

Integrated I/O

Processor Information

Integrated PCI IDE

Dual-channel master mode
Supports up to four Enhanced IDE devices
Support for UltraDMA-100/66/33 IDE devices and
ATAPI compliant devices

xtra accessories can be purchased at the Tyan Online Store:

http://www.etyan.com

*** 8MB may be available on some Tiger 200T models. Check the Tyan website for updates:

http://www.tyan.com

Promise FastTrak100 IDE RAID controller
0/1/0+1 RAID options
Dual-channel master mode
Support for UltraDMA-100/66/33 IDE devices

Integrated IDE RAID

(manufacturing option)

ATI Rage XL PCI Accelerator
4 MB (or 8MB***) 1Mx16 SDRAM frame buffer
Standard 15-pin analog VGA port

Integrated 2D/3D graphics

^ If your chassis supports frontside USB cables, it will usually come with those cables.

Check with your chassis vendor for details. Tyan does not provide frontside USB cables.

Содержание S2505T


























































Результаты поиска

Содержание S2505T

Отзывы:

Похожие инструкции для S2505T

Бренды по названию

Популярные бренды

TYAN S2505T, Руководство пользователя

Результаты поиска

Содержание S2505T

Отзывы:

Похожие инструкции для S2505T

Бренды по названию

Популярные бренды