TYAN S2505T Скачать руководство пользователя страница 5

Страница: 5 / 57

Tiger 200T S2505T

Chapter 1: Introduction

1.1 Congratulations!

The Tiger 200T is a high performance motherboard designed for server and performance applications

that require the power of dual Intel

Pentium™ III FC-PGA processors (universal) or a single Celeron™

FC-PGA processor. This motherboard utilizes the VIA Apollo Pro133T chipset and can support CPU

speeds of 500 MHz through 1.13+ GHz and front side bus speeds of 100 MHz or 133 MHz. Please see

Tyan’s website for updates and information concerning CPU information and support:

http://www.tyan.com

This integrated performance board is supported in an ATX form factor. Some of the features included are

onboard UltraDMA-100/66/33 support, and (

optional

) Promise

IDE RAID.

With I/O and drive controller support onboard, the five 32-bit PCI v2.2 slots and one ISA slot are free for

numerous types of add-on expansion cards. The four 168-pin DIMM sockets can support up to 2GB* of

buffered or unbuffered PC100 SDRAM, or up to 1.5GB of buffered or unbuffered PC133 SDRAM.

Remember to visit Tyan’s website at

http://www.tyan.com

. There you can find information on all of

Tyan’s products with FAQs, distributors list, and BIOS settings explanations.

* check the Tyan website for updated details on memory compatibility:

http://www.tyan.com

You now own one of the premier dual processing solutions on the market!

Содержание S2505T


























































Результаты поиска

Содержание S2505T

Отзывы:

Похожие инструкции для S2505T

Бренды по названию

Популярные бренды

TYAN S2505T, Руководство пользователя

Результаты поиска

Содержание S2505T

Отзывы:

Похожие инструкции для S2505T

Бренды по названию

Популярные бренды