Tiger 200T S2505T
47
Creating an array for Performance (RAID 0)
FastTrak100 allows users to create striped arrays with 1, 2, 3, or 4 drives. To create your array, follow the
steps outlined below.
Choose
Performance
under the
Optimize Array
section.
Select how you will use your PC the mode under the
Typical Application usage
section. The
choices are
A/V Editing
,
Server
, and
Desktop
(the default).
Press
<Ctrl-Y>
keys to Save and create the array.
Reboot the system.
Proceed to install the drivers from the driver disk.
Creating a Security Array with New Drives (RAID 1)
To create an array for data protection using new hard drives, use the following steps.
Choose
Security
under the
Optimize Array for
section.
Press
<Ctrl-Y>
keys to Save your selection.
The window below will appear.
Press “N” for the
Create Only
option.
A window will appear almost immediately confirming that your Security array has been created.
Press any key to reboot the system.
Once the arrayed drives have been formatted, proceed to install your O/S and drivers from the
driver disk.
1
Step
2
Step
3
Step
4
Step
5
Step
NOTE:
FastTrak100 permits only two drives to be used for a single Mirrored array in Auto
Setup. If a third drive is attached, it becomes a “hot” spare drive. If four drives are
attached, the Mirroring option will not be available at all.
Do you want the disk image to be duplicated to another? (Yes/No)
Y - Create and Duplicate
N - Create Only
1
Step
2
Step
3
Step
4
Step
5
Step
6
Step
Array has been created.
<Press Any Key to Reboot>
