http://www.tyan.com
28
Figure 2-18
Top Clip
Side Braces
Installing SECC2 CPUs - Option 2
Another method to secure an SECC2
CPU is by using the Universal
Retention Module (also provided by
Tyan). The universal retention
module is designed to accommodate
most versions of the Pentium Celeron
CPUs. Included in this solution is an
overhead clip to lock the CPU into its
slot along with the side universal
braces. See Figure 2-18 (right) for the universal
retention module components.
To install the CPU, place the
two side braces at the ends
of the CPU slot (see Figure 2-
19 left). The screws on the
motherboard should fit
through the holes of the
retention braces. Tighten
and secure both braces using
a screw driver.
Next, carefully insert the
CPU between the braces and
onto the CPU slot (see
Figure 2-20 right). Make
sure the CPU fan faces
towards the center of the
motherboard.
Chapter 2
Board Installation
Figure 2-20*
*Note the images shown above are used to describe a concept and may not repre-
sent your motherboard
Figure 2-19*
