TYAN S2056 Скачать руководство пользователя страница 55

Страница: 55 / 81

S2056 Tomcat i810e

BIOS

comoputer is in the power-conserving state. The settings are 12.5%, 25%,

37.5%, 50%, 62.5%, 75%, or 87.5%.

Time Overflow Enable

Set this option to Enabled to enable the SMI timer overflow. The settings are

Enabled or Disabled.

Thermal SMI Enable

Set this option to Enabled to enable the thermal SMI. The settings are Enabled

or Disabled.

PMI SMI Enable

Set this option to Enabled to enable the PME SMI. The settings are Enabled

or Disabled.

SW SMI Timer Enable

Set this option to Enabled to enable the software SMI timer. The settings are

Enabled or Disabled.

TCO Logic SMI Enable

Set this option to Enabled to enable the TCO logic SMI. The settings are

Enabled or Disabled.

RTC Resume

If Enabled, this option allows you to set an hour and minute for the system to

resume (wake up). The next two fields allow you to choose the wake up time.

Note that the time fields will not be available if this option is set to Disabled. In

order for this wake up function to work, the system must have been brought

up at least past the POST before it was last shut down (i.e. if you turn the

system off before the POST, the registry will not be set, and the system will not

be able to wake up using this function). The settings are Enabled or Disabled.

USB Controller Resume

Set this option to Enabled to enable USB controller (Universal Serial Bus)

resume. The settings are Enabled or Disabled.

PME Resume

Set this option to Enabled tp enable PME resume. The settings are Enabled or

Disabled

Содержание S2056


















































































Результаты поиска

Содержание S2056

Отзывы:

Похожие инструкции для S2056

Бренды по названию

Популярные бренды

TYAN S2056, Руководство пользователя

Результаты поиска

Содержание S2056

Отзывы:

Похожие инструкции для S2056

Бренды по названию

Популярные бренды