http://www.tyan.com
6.4 Compute Blade Blanks (Option)
!
CAUTION
:
Most repairs to the Tyan MicroServer should only be performed by a professional
service technician. Basic repairs and troubleshooting can be done if authorized in
the product documentation or if directed by telephone or online support from
Tyan. If damage has occurred due to repairs or service that is not approved by
Tyan, the product warranty becomes invalid. Review all safety guidelines that are
provided with the Tyan MicroServer.
!
CAUTION
:
For cooling purposes, when a compute blade is removed, it should be
immediately replaced with another compute blade for proper cooling and air
circulation to occur.
6.4.1 Removing a Compute Blade Blank
Prerequisite:
Disconnect all cables and peripherals from the compute blade(s).
1. Press and hold the release latch on the compute blade blank. (Figure 4-2)
2. Pull the handle on the compute blade blank to remove it from the chassis.
Release
Latch
Handle
Figure 4-2. Removing a Compute Blade Blank
6.4.2 Installing a Compute Blade Blank
1. Align the compute blade with the chassis bay. (Figure 4-2)
2. Install the compute blade blank into the chassis until the release latch locks and the
compute blade is seated properly with the chassis.
