http://www.tyan.com
48
Chapter 3
Onboard Resource Settings
NetWare Server
In AUTOEXEC.NCF, Load E100B.LAN and add the following
statement (you must include the equal sign for servers):
FORCEDUPLEX=2
SPEED=100 (or 10 if 10BASE-T)
For more information, see the README file for NetWare servers.
Windows NT
While running Windows NT:
1. From the Control Panel, double-click the Intel PROSet icon.
2. PROSet examines your system and displays the Adapter Setup
window. If you have multiple adapters, click the “Show All Adapters”
box and then select the adapter you are configuring (you can identify it
by its Ethernet address). Each adapter must be configured separately.
See “Installing Multiple Adapters” for more information.
3. From the window that appears, click Change.
4. From the Adapter Setup window, click the menu for Network Speed.
5. Click 100 or 10 Mbps, depending on hub speed.
6. Click the menu for Duplex Mode
7. Click Full.
8. Click OK when finished.
9. Click Restart Windows NT.
Windows 95
While running Windows 95:
1. From the Control Panel, double-click the Intel PROSet icon.
2. PROSet examines your system and displays the Adapter Setup
window. If you have multiple adapters, click the adapter you are
configuring (you can identify it by its Ethernet address). Each adapter
must be configured separately. See “Installing Multiple Adapters,” for
more information.
3. From the window that appears, click Change.
4. From the Adapter Setup window, click the menu for Network Speed.
5. Click 100 or 10 Mbps, depending on hub speed.
6. Click the menu for Duplex Mode
7. Click Full.
procedure
1.
2.
3.
procedure
1.
2.
3.
