Manual Configuration
12
Parity
This parameter enables/disables the host’s ability to perform error checking on incoming
characters and ensure accuracy. Allowable settings are EVEN, ODD, MARK, SPACE, NONE
and IGNORE. The default value is NONE.
Selecting IGNORE will still add a parity bit to each character, but the value is indeterminate.
Selecting NONE will prevent the sending of the parity bit. In either case, the host will not
perform an error check on incoming characters.
Note:
Depending on the Data Bits and Parity settings, the Stop Bits and Display PE
parameters may not be accessible. See
for details.
Stop Bits
This parameter sets the number of stop bits between each character transmission, either 1or 2
(the default value is 1) with the following exceptions:
A. When using 7-data bits and no parity, the ProMotion will automatically select 2-stop
bits.
B. When using 8-data bits and any parity the ProMotion will automatically select 1-stop
bit.
In either case, the Stop Bits parameter will not be accessible. See
for accessibility.
