PROMOTION TECHNICAL REFERENCE MANUAL
Document 15774(1.0.0.0)
15
Should you press a key on the ProMotion and the existing handshake condition prevents
transmission to the host within approximately one second, the ProMotion will display a wait
symbol (
Any subsequent key presses on the ProMotion will generate an audible tone. To cancel the
waiting condition and send the waiting keystroke until the next keystroke, press
CTRL
and
F5
simultaneously.
Figure 3-2: Wait Symbol
Echo
This parameter enables/disables the ProMotion’s ability to display (echo) keypad entries on
the screen. The default value is DISABLE.
Escape Mode
This parameter sets the Escape Command type used by the ProMotion to either ANSI or
PRIVATE. The default mode is ANSI.
CR/LF Mode
This parameter determines which character is sent by the ProMotion to the host when the
ENTER
key is pressed, and how the ProMotion interprets a linefeed character sent by the
host. Available options are NORMAL and NEWLINE. The default value is NORMAL.
In NORMAL mode, pressing
ENTER
on the ProMotion sends a carriage return to the host. A
linefeed received by the ProMotion moves the cursor to the same column on the next line.
In NEWLINE mode, pressing
ENTER
on the ProMotion sends both a carriage return and a
linefeed to the host. A linefeed received by the ProMotion moves the cursor to the first
column on the next line.
Self-Test
This setting determines if the ProMotion will perform a confidence test at boot-up. The test
initially displays the U.S. ASCII Character Set, performs a number of internal tests, and
shows the model identifier string with checksum. The ProMotion will beep when the test is
completed. If an error occurs, the ProMotion will display an error message.
