Two Technologies JETT XL, Руководство пользователя

Страница: 40 / 58

C
ONNECTIONS
5-2
5.
Close the Control Panel and return to the desktop.
C
ONFIGURING THE
PC
After you configure the JETT, you must configure the PC before making an ActiveSync connection.
Note: If you are installing ActiveSync on the PC for the first time and the Get Connected wizard appears, click
Cancel.
1.
On the PC, start ActiveSync .
2.
On the ActiveSync menu bar, select File and then Connection Settings . The Connection Settings
dialog box opens.
3.
If not selected, check the Allow connection to one of the following box , and assign the number of
the available COM port (typically COM1).
Note: If you have to share a COM port with a device that has a different connectivity program, you
will need to free the COM port from ActiveSync before using the COM port for the other device. The
next time you want to connect a device to ActiveSync, you will need to assign the COM port back to
ActiveSync.
4.
If needed, change how the PC should connect to when passing through ActiveSync
T
(i.e., the JETT
can use the computer's network connection as if it were its own to download files or browse the
Internet). The default setting is
Automatic .
Note: For additional security, disable network bridging on the PC (specifically, bridging to a Remote
NDIS adapter) before connecting to the PC to pass though to the Internet or a network. Proceed to
the next section. Do not close this dialog box.