Replacing the Battery:
1.
Unscrew the ignition button and remove the old battery.
2.
Replace with a new AAA battery.
Air Shutter Adjustments:
Each grill air shutter is tested and adjusted at the factory prior to shipment; however, variations in
the local gas supply may make it necessary to adjust the air shutters. The flames of the burners
should be visually checked and compared with the next figure.
Flames should be blue and stable with no yellow tips, excessive noise
or lifting. If any of these conditions exist, check if the air shutter or
burner ports are locked by dirt, debris, spider webs, etc. and proceed
with air shutter adjustment. A sheet metal cup at the inlet of the
burner called an air shutter governs the amount of air, which is pulled
through a burner. It is locked in place by a setscrew, which must be
loosened prior to lighting the burner for adjustment.
The air shutter adjustment screws are accessible with a screwdriver.
Remove the burner by loosening the hex nut. Loosen the
lock screw of the air shutter. Make certain that the burners
are sitting properly on the orifices and light the burners.
To adjust grill burner flame, be advised to adjust according
to the following directions, also be careful, as the burner
may be very hot. If the flame is yellow indicting
insufficient air, turn the air shutter counter-clockwise to
allow more air to the burner.
If the flame is noisy and tends to lift away from the burner,
indicating too much air, turn the air shutter clockwise, until
stable blue flame is obtained.
Air Shutter
16
