TwinEagles TXBQ-26G-T Скачать руководство пользователя страница 14

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NOTE:

 The rotisserie motor requires 120 volt 

supply. The power supply cord on the motor is 

equipped with a 3-prong (grounded) plug for 

protection against shock hazard. Do not cut or remove 

the grounding prong from the plug. 

TO SECURE POWER TRANSFORMER 

All models with interior lights have a power transformer 
which is concealed in a stainless steel box with an 
attached power supply cord.  This transformer must be 
secured in a dry location and away from excessive heat.  
1a. In a base cart application, 2 mounting screws with 

nuts are provided at the bottom right rear corner of 
the cart.  If not provided, drill 2 holes using the 
transformer box as a template.  Secure the 
transformer box as shown. 

1b. In an island application secure the transformer box 

near the GFCI 120V outlet. 

2.   Plug-in the transformer’s power cord to the properly 

grounded GFCI 120V outlet. 

 

 

 

INTERIOR LIGHT OPERATION 

The Pinnacle grill is equipped with two interior halogen 
lights for late night grilling. 

1.

 

Push the switch located at the front to the ON or 
OFF position as light is needed. 

2.

 

Do not touch the light because it 
may be hot and can cause serious 
burns. 

1a. 

1b

13 

Содержание TXBQ-26G-T



























Отзывы: