TwinEagles TXBQ-26G-T Скачать руководство пользователя страница 10

 

LOCATING THE GRILL 

– 

E

XTREME 

G

AS 

G

RILL

 

 

This gas appliance is design and certified for outdoor use only.  Do not operate the grill inside a building, 

garage, recreation vehicle or any enclosed area.  When choosing an area, consider exposure to wind, 

proximity to traffic paths and length of gas supply line.  Keep gas supply lines as short as possible to reduce 

pressure drop.  Keep the grill away from windy area but keep the grill in a well-ventilated area. Do not 

obstruct the flow of combustion and ventilation air around the grill. 

 

Do not locate the grill under overhead unprotected combustible surfaces. 

 

 
CLEARANCE TO COMBUSTIBLE CONSTRUCTION 

Minimum clearance of 

18 inches

 from the back and 

20 inches

 from the sides of the grill to 

adjacent combustible construction must be maintained.   

 

CLEARANCE TO NONCOMBUSTIBLE CONSTRUCTION 

A minimum clearance of 2 1/2” from the back trim of the grill above cooking surface to non-

combustible construction is required to allow the grill hood to open completely.  A minimum of 6” 

clearance to the sides of the grill above cooking surface to non-combustible construction is 

recommended to provide space for the rotisserie motor and the skewer handle.  The grill can be 

installed directly next to non-combustible construction below the cooking surface. 

 

 

 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 
 
 
 
 
 

Содержание TXBQ-26G-T



























Отзывы: