OPERATING INSTRUCTIONS CONTROL FUNCTIONS
HEAT ON (18/23EF020GAA )
-
Press this switch can turn ON and OFF heater output. And this switch must be in ON position for
HEAT-HI
switch functions to work.
HEAT HI (18/23EF020GAA ) -
The
HEAT HI
switch can turn on high heat and double output.
FLAME (18/23EF020GAA )-
The flame control switch can turn ON and OFF the flame brightness.
Figure 4
Figure 5
23EF020GRA
28EF020GRA
33EF020GRA
Model#
Model#
Figure 3
Model#
18EF020GAA
23EF020GAA
E-5
POWER (23/28/33EF020GRA)
-
The
POWER
switch supplies power to all of the functions of the fireplace. This switch must be in the on position
for any of the functions including the remote to work.
TEMPERATURE (23/28/33EF020GRA)
-
The Temperature control knob is used to set up the room temperature. The further the knob is rotated clockwise,
the higher the set point temperature will be. Turning the knob counter clock-wise will lower the set temperature.
Use this function to help regulate the ambient temperature.
HEATER (23/28/33EF020GRA)
-
Your fireplace consists of a fan forced wire element type heater. The
HEATER
switch turns the heater ON and OFF.
The blower starts to work and blow hot air when turn on this button.
FLAME (23/28/33EF020GRA)-
Each time the flame button is pressed, the intensityof the flame decreases. There are six brightness levels you can
cycle through including the OFF setting.
DOWN LIGHT (28/33EF020GRA ONLY)
-
The
DOWNLIGHT
switch turns on thedown light that illuminate inside of the firebox.
HEAT- ON
HEAT- HI
FLAME
TEMPERATURE
TEMPERATURE
HEATER
HEATER
OFF
FLAME
OFF
FLAME
POWER
POWER
DOWN LIGHT
OPERATION INSTRUCTIONS WITHOUT REMOTE
TO ACCESS CONTROL PANEL-
Control panel can be accessed at upper-right corner of insert by pushing and lifting up the small door.
OPERATION INSTRUCTIONS WITH REMOTE