O P E R AT I N G I N S T R U C T I O N S
CONTROL FUNCTIONS
MAIN POWER
- The Main Power switch supplies
power to all of the functions of the fireplace.
WARNING: During any service of this appliance, the
power to the unit must be turned off. First turn the
main power switch to the “OFF” position. Then
remove the electrical plug from the wall outlet.
HEATER
- The Heater switch turns the heater element
and blower motor on and off.
Heater should always be
turned on and off by this control only.
DOWN LIGHT (28E05 & 33E05 ONLY)
-
The Down Light switch turns on the down lights that
illuminate inside of the firebox.
3 Switch Control Panel (models 28E05 and 33E05)
2 Switch Control Panel (models 23E05)
2 Switch Control Panel (models 18E05)
E-7
TEMPERATURE
- The Temperature control knob
regulates the temperature level of the heater. Turning
the knob clockwise will increase the heat output. The
further the knob is rotated clockwise, the higher the set
point temperature. Turning the knob counter-clock-
wise will lower the set point temperature.
FLAME BRIGHTNESS
- The Flame Brightness
control knob adjusts the flame brightness. Turning the
knob to the left (counter-clockwise) dims the lights and
flame effect. Turning the knob to the right brightens the
lights and flame effect.