12
Manual Lighting Instructions (Top Burner Only)
If the electronic ignition does not light the top burner, the burner can be lit manually using a long match (or
taper).
1.
Remove the cover from the top burner.
2.
Ensure the Gas Supply Cylinder Valve is closed and the burner knob is set to the off position.
3.
Place a lit match (or taper) over the burner near the igniter.
4.
Press in and rotate the burner knob counterclockwise slowly to the “HI” setting. Make sure match (or
taper) is lit before turning the knob.
5.
If ignition does not take place within 4 seconds, turn the burner knob to the off position, leave the
cover off, and wait 5 minutes to repeat lighting procedure.
6.
CAUTION: Do not leave the Breakfast Club unattended while cooking.
Extinguishing the Burner Flame
1.
Depress and rotate burner knob to OFF.
2.
Natural Gas: Turn the gas off at the installer supplied gas shut-off valve.
3.
Liquid Propane: Close the valve on the gas supply cylinder.
Replacing the battery
CAUTION:
THE GRIDDLE PLATE BURNER CANNOT BE LIT MANUALLY.
NOTICE:
On the initial use, light the burners and griddle, let them run on high for 15-20 minutes to burn off any
residue from the factory.
