Twilight MC-SUP2000H, Руководство пользователя

Страница: 30 / 69

Chapter 3 Menu Windows Arrangement
- 25 -
M92 difference with the actual fluid sound speed, pipe parameters entered and
the transducer installation should be checked again.
M93 Displays total transit time and delta time(transit time difference)
M94 Displays the Reynolds number and the pipe factor used by the flow rate
program.
M95 Not used
M96 Not used
M97 Command to record the pipe parameters entered by the user either to the
built- in data logger or to RS-232C serial interface
M98 Command to record the diagnostic information either to the built-in data
logger or to RS-232C serial interface
M99 Command to copy the current display either to the built-in data logger or to
RS-232C serial interface
M+0 Display the last power outage time and flow rate
M+1 Displays the total working time of the instrument
M+2 Displays the last power-off date and time
M+3 Displays the last power-off flow rate
M+4 Displays the times of instrument powered on(the instrument has been
powered on)
M+5
A scientific calculator for the convenience of field working. All the values
are in single accuracy.
The drawback is that the user can't operate it by direct key-pressing
M+6 Automatic supplement-off flow switch fluid sound velocity threshold setting
M+7 Net cumulative flow this year
M+8 Net cumulative flow this year
M+9 Total time of failure operation (including power outage time)
M.2 Store static zero
M.5 The threshold value of Q is set
M.8 Maximum instantaneous flow for the day and month
M.9 Serial test window with CMM instruction indicating output
M-0 Circuit hardware parameter adjustment inlet
M-1 4-20mA current loop calibration
M-2 AI3 analog input 4 mA input calibration
M-3 AI3 analog input 20 mA input calibration