Tweco FABRICATOR 252i, Руководство по эксплуатации

Страница: 39 / 100

INSTALLATION/SETUP FABRICATOR 252i
Manual 0-5155 3-9 INSTALLATION/SETUP
12. 10 Pin Accessories Socket
The 10 pin Accessories Socket is used to connect remote devices such as a spool gun to the welding power source.
To make connections, align keyway, insert plug, and rotate threaded collar fully clockwise.
Art # A-10813
A
B
C
D
E
F
G
H
I
J
J
I
D
G
E
F
H
A
C
B
Peripheral
Resistor
1
3
Trigger
1
1
2
3 3
2
1
Wirespeed
Potentiometer
Voltage
Potentiometer
M
+
-
Motor
24V
Figure 3-4: Remote Control Socket
Socket Pin
Function
A Voltage Pot. Wiper
B
Wire Feed Motor (-)
C
Wire Feed Motor (+)
D
Trigger Switch Input
E
Wire Speed Pot. & Voltage Pot. (+) CW 10K ohm
F
Wiper Arm Speed Pot.
G
Trigger Switch Input & Solenoid (-)
H
Wire Speed Pot. & Voltage Pot. (-) ACW
I
Solenoid (+)
J
Peripheral Program Resistor
Table 3-4
13. Positive Welding Output Terminal
The positive welding terminal is used to connect the welding output of the power source to the appropriate welding
accessory such as the Fusion MIG Gun (via the MIG Gun polarity lead), electrode holder lead or work lead. Positive
welding current flows from the power source via this heavy duty bayonet type terminal. It is essential, however,
that the male plug is inserted and turned securely to achieve a sound electrical connection.
CAUTION
Loose welding terminal connections can cause overheating and result in the male plug being fused in the
bayonet terminal.