TVS WEGO 110 Fi, Руководство пользователя

Страница: 52 / 60

MAINTENANCE
-43-
MAINTENANCE
A
Warning
Always make sure that whenever the wheel is
removed, axle nut is properly re-tightened to the
specified torque.
2. Pull out the axle (2) along with a washer and
take out a spacer from the RH of the wheel.
3. Place a support below the foot board to prevent
vehicle from falling and lift the vehicle up.
4. Dislocate the wheel assembly along with brake
panel from the front fork. Separate the brake
panel from the wheel and take out the wheel.
5. Reverse the procedure for reassembling. While
reassembling ensure to locate the lug on the
fork leg L to the slot in the brake panel.
REAR WHEEL REMOVAL
1. Place the vehicle on the centre stand.
2. Hold the rear brake firmly and remove the
wheel mounting nut (A) along with a washer.
3. Slightly tilt the vehicle and take out the wheel
from the rear axle.
4. Reassemble the wheel in the reverse order of
removal. Hold the rear brake firmly while
re-tightening the mounting nut for easy locking
of wheel.