TVS WEGO 110 Fi, Руководство пользователя

Страница: 44 / 60

A spark plug with heavy carbon deposits will not
produce strong sparks. Hence, only if necessary,
clean the carbon deposits from the spark plug with
a small wire brush or spark plug cleaning tool.
Inspect the spark plug electrodes (A) and (B) for any
corrosion. If found any replace the sparkplug with
new. Inspect the spark plug gap with a wire gauge /
feeler gauge. Readjust the sparkplug gap to
0 ~ 1.0 mm if required. .9
After cleaning and adjusting the gap, reinstall the
spark plug and tighten by hand to avoid cross
threading. Finally tighten using spark plug spanner.
MAINTENANCE
-35-
Do not use vehicle by shorting the wires without a
fuse . This may result in overheating of electrical /
wiring and may result in fire. Do not use fuse of
higher amperage than specified for the safety of
electrical system.
Caution
SPARK PLUG
1. Open the cover front as explained earlier.
2. Clean the dust and mud around the spark plug
mounting to avoid falling inside the cylinder.
3. Pull out the suppressor cap from spark plug.
Using the spark plug spanner, remove the
spark plug.
0.9 ~ 1.0 mm
A
B
MAINTENANCE
Good Fuse Blown Fuse