TVS WEGO 110 Fi, Руководство пользователя

Страница: 13 / 60

Causes for poor braking
1. If the brake shoes / pads or drum / disc are worn
out or if there is water or oil on them, sufficient
friction does not develop and brakes do not
work well.
2. Even when the brake works normally, if the
road surface is wet or the tyre surface is
worn-out, tyres do not take a firm hold on the
surface, increasing the stopping distance.
3. Approximately 60% braking effect is from front
brake. Non-usage of front brake causes poor
braking.
SAFE RIDING TIPS
-4-
SAFE
RIDING
TIPS
Warning
As the vehicle speed increases, the stopping
distance also increases progressively. Be sure
that, you have sufficient distance between you and
the vehicle or obstruction ahead of you.
Avoid directing the water jet directly towards brake
drums during water wash.
Using only the front or rear brake is dangerous and
can cause skidding and loss of control.
Apply both
the brakes together and with great care on a wet
road or other slippery surfaces
. Any abrupt
braking on slippery or irregular roads can cause loss
of rider control.
ACCESSORY INSTALLATION AND
SAFETY TIPS
Use extreme caution while selecting and installing
the accessories for your scooter.
The addition of
unsuitable accessories can lead
to unsafe operating conditions. Your friendly
Dealer will assist you in selecting quality
accessories and installing them correctly.
While selecting the accessories, make sure the
accessories
should not obstruct lighting,
steerability, suspension level and ground
clearance.
Additional electrical equipments and controls
should not exceed the specified electrical
system load of the vehicle (capacity of battery
and magneto).