ITEM
NO.
DESCRIPTION
ITEM
NO.
DESCRIPTION
1
Large Drift
6
17mm Collet
2
Small Drift
7
19mm Collet
3
10mm Collet
8
20mm Collet
4
12mm Collet
9
25mm Collet
5
15mm Collet
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
MS062 Issue: 2(HF) - 10/05/18
Original Language Version
© Jack Sealey Limited
Refer to instruction
manual
Wear eye
protection
Wear protective
gloves
MOTORCYCLE WHEEL BEARING REMOVAL KIT
9pc
MODEL NO:
MS062
1. SAFETY
WARNING!
Ensure Health & Safety, local authority and general workshop practice requirements are adhered to when using this
equipment.
WARNING!
Always refer to the motorcycle manufacturer’s service instructions, or a proprietary manual to establish the
current procedure for removing motorcycle wheels.
Ensure that the motorcycle wheel and hub are in good condition.
Use the wheel bearing removal kit in a suitable work area. Keep the area clean and tidy and ensure there is adequate
lighting.
Keep children and unauthorised persons away from the work area.
Keep hands clear of the drift and hammer when using the wheel bearing removal kit.
Wear appropriate personal protective equipment when using the wheel bearing removal kit. A full range of PPE is available from your
Sealey stockist.
DO NOT
use the wheel bearing removal kit for any purpose other than for which it is designed.
DO NOT
use the wheel bearing removal kit if any part of it is damaged or missing.
DO NOT
allow untrained persons to use the wheel bearing removal kit.
DO NOT
attempt to remove a motorcycle wheel bearing when you are tired or under the influence of alcohol, drugs or intoxicating
medication.
When not in use, clean the wheel bearing removal kit and store in a safe, dry, childproof area.
WARNING! The warnings, cautions and instructions in this manual cannot cover all possible conditions and situations that
may occur. It must be understood that common sense and caution are factors which cannot be built into this product, but must
be applied by the operator.
2. INTRODUCTION
UCT
For easy removal of wheel bearings. Simply choose the correct size collet for the bearing and hammer one of the drifts into the allocated slot.
Covers sizes from 10-25mm so will suit most popular motorcycles and ATV/Quad Bikes.
3. CONTENTS
U
