21
PDF-MG-KVM-53x-V1.00
2.
Select an appropriate parity.
3.
Select 1 or 2 stop bits.
Choosing what to show on the decoder monitor when there is no connection
You can choose what to show on the monitor connected to the decoder when the encoder and
decoder are disconnected, or the decoder is not in use.
Choose what to show on the monitor in the
KVM Settings Decoder
menu. In the
Home
menu press
G > R.
Press S to enable or disable the show last image feature.
▪
If the show last image feature
is disabled, the monitor shows a black screen.
▪
If the show last image feature is enabled, the monitor shows the last image received before
disconnection.
When you choose to show the last image received, the image has a flashing red border.
