TVLogic RKM Series Скачать руководство пользователя страница 9

Страница: 9 / 52

LCD Rack Mountable Monitor 9

TALLY

F2 MENU

/SOURCE

DOWN UP ENTER POWER

SDI IN

SDI OUT

CVBS

REMOTE

USB

RS-422 IN RS-422 OUT

ETHERNET IN ETHERNET OUT

DC IN

3. Controls & Functions

RKM-443A : FRONT

• [TALLY] Lamp

- Tally lamp that can be toggled in green or red

using the REMOTE(RJ-45) port or network.

• [F1][F2] Button/Lamp

- User can set the desired funtions in Function

keys.

- Used to activate the [F1]~[F2] function.

• [MENU/SOURCE] Button

- Used to activate the OSD menu.

- When the OSD menu is activated, press this

button to exit from the menu.

- Press the menu button more than 2sec, input

select menu will activated.

- To change the input source press [UP]/

[DOWN] buttons to move and select the

desired input.

• [UP] / [DOWN] Button

- Used to move within the menu when the OSD

menu is activated and is also used to increase

or decrease the value of selected feature.

• [ENTER] Button

- Used to select the feature of main menu and

the sub menus.

- When the OSD menu is deactivated, it will

activated in orde of : [Bright]-[Contrast]-

[Chroma]-[Aperture]. After the function is

actevated press [DOWN]/[UP] button

to adjust the values.

• [POWER] Button

- Used to turn the power on and off. If the signal

is normal, Green LED light is indicates. If the

signal is unsupported or disconnected, LED

light flashes in green.

Содержание RKM Series





















































Результаты поиска

Содержание RKM Series

Отзывы:

Бренды по названию

Популярные бренды

TVLogic RKM Series, Руководство по эксплуатации

Результаты поиска

Содержание RKM Series

Отзывы:

Бренды по названию

Популярные бренды