manualshive.com logo in svg

TVLogic RKM Series, Руководство по эксплуатации

Поделиться
Скачать
TVLogic RKM Series Скачать руководство пользователя страница 18

18 LCD Rack Mountable Monitor   

[1] Menu Tree

4. Menu Tree & Adjustment

•  OSD(On-Screen Display) Menu helps you  

  use various functions.

•  This Picture is the menu structure for     

 RKM-Series.

•  User may control various functions using  

  the MENU, UP, DOWN, ENTER buttons on  

  the bottom front of the monitor.

•  Menu Control sequence follows the order  

 below:

 

1. Press the MENU button to activate the OSD  

    menu.

2. Move to a desired menu with the UP/DOWN  

    button. 

3. Press the ENTER button to select a menu   

    and move to a sub-menu with the UP/DOWN 

    button. 

4. Press the ENTER button to select the desired  

    sub-menu. (The selected sub-menu will be 

    highlighted)    

5. Press the ENTER button or the MENU button  

    to save the new value after adjusting the   

    value with the UP/DOWN button.

6. Press the MENU button to return to the    

    previous menu and if there is no previous  

    menu, the OSD menu will be removed from  

    the screen.

[2] Menu Control

[3] Menu Control Sequence

Содержание RKM Series





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды