TVLogic RKM Series Скачать руководство пользователя страница 11

Страница: 11 / 52

LCD Rack Mountable Monitor 11

TALLY

UP
DOWN
ENTER
F1

MONITOR 1
MONITOR 2
MONITOR 3
SOURCE

POWER

SDI OUT

DC IN

USB

SDI IN-A

HDMI IN

CVBS REMOTE

ETHERNET IN

ETHERNET OUT

SDI IN-B

RS-422 IN

RS-422 OUT

3. Controls & Functions

RKM-356A : FRONT

• [TALLY] Lamp

- Tally lamp that can be toggled in green or red

using the REMOTE(RJ-45) port or network.

• [MONITOR 1][MONITOR 2][MONITOR 3]

Button/Lamp

- Used to select desired monitor among the

monitor 1/2/3.

• [SOURCE] Button

- Used to select input source.

- To change the input source press [UP]/

[DOWN] buttons to move and select the

desired input.

• [POWER] Button

- Used to turn the power on and off of the

selected monitor among the monitor 1/2/3.

- If the signal is normal, Green LED light is

indicates. If the signal is unsupported or

disconnected, LED light flashes in Yellow.

• [MENU] Button

- Used to activate the OSD menu of the

selected monitor among the monitor 1/2/3.

- When the OSD menu is activated, press this

button to exit from the menu.

• [UP] / [DOWN] Button

- Used to move within the menu when the OSD

menu is activated and is also used to increase

or decrease the value of selected feature.

• [ENTER] Button

- Used to select the feature of main menu and

the sub menus.

- When the OSD menu is deactivated, it will

activated in orde of : [Volume]-[Bright]-

[Contrast]-[Chroma]-[Aperture]. After the

function is actevated press [DOWN]/[UP]

button to adjust the values.

• [F1][F2] Button/Lamp

- User can set the desired funtions in Function

keys.

- Used to activate the [F1]~[F2] function.

Содержание RKM Series





















































Результаты поиска

Содержание RKM Series

Отзывы:

Бренды по названию

Популярные бренды

TVLogic RKM Series, Руководство по эксплуатации

Результаты поиска

Содержание RKM Series

Отзывы:

Бренды по названию

Популярные бренды