32 LCD Rack Mountable Monitor
[7] Display & Set
• Focus Assist Color
- Used to select a color for Focus Assist among
red, green and blue.
- This feature is available only when the Focus
Assist mode is activated.
• Focus Assist Level
- Used to set the edge difference value
between the edges in an image.
- Available values are from 0 to 100. Larger
value means more sophisticated detail
detection.
- Designated color is displayed when the
difference of the edges exceeds the
previously set value.
- This feature is available only when the Focus
Assist mode is activated.
• Back Light
- Used to indicate the backlight level.
- In the case of System Default, the value returns
to factory default(after color calibration).
- Available values are from 0 to 50.
• Internal Pattern
- Generates ColorBar and Grayscale Pattern
internally.
- Selectable range for Gray Pattern is from 0%
to 100% with 5% increment.
* See section “7. Other Function -> [8] Internal
Pattern” for more information.
• Closed Caption
- This item selects Closed Caption.
- Available modes are OFF, 708, 608(LINE21) and
608(ANC).
* 608 : CEA-608-B, 708 : CEA-708-C standard
display only.
• Zoom (Not supported in RKM-535A)
- Used to magnify the image up to 90% on a
pixel basis and display on full screen.
ex) 10% ZOOM : When the input signal is
1920x1080, it wil enlarge 10% (missing
1728(H) x 976(V)), displays the area of 1728(H)
x 976(V) to the full screen.
* See section “7. Other Functions -> [4] Zoom”
for more information.
• Zoom H/V Scroll (Not supported in RKM-
535A)
- Activated when [Zoom] mode is selected.
- Used to move the enlarged image to the left/
right or Up/Down by controlling with the
Knob.
• Focus Assist
- Focus Assist helps the shooters to easily find
out the exact area in the picture that is in
focus, simply by adding colors on the
boundaries of the subject in the picture.
- Activates in the order of [Off] - [Mono On] –
[Color On].
* (Mono) On : The boundary of the area with
good focus is colored with the designated
color, while the rest of the areas(pixels)
receive only Y’(Luma) signals and become
black & white image.
* (Color) On : Only the boundary of the area
with good focus is displayed with the
designated color.
* See section “7. Other Functions [6] Focus
Assist” for more information.
5. Menu Operations
