3
Connecting to a Television
For a basic connection from your Set Top Box to the television, use the Composite connection outlined below.
For the highest quality connection use a direct HDMI connection, see below.
First time Installation
After all connections have been made properly,switch on TV and make sure the unit is connected to the main Power.Press power button to switch the unit on.
If you are using the unit first time or have restored the unit to Factory Default,the Installation Guide Menu will appear on you TV screen.
OSD Language :
Press RIGHT/LEFT key to select a language
Using the Remote Control
To use the Remote Control, point it towards the front of the Digital Set Top Box
The Remote Control has a range of up to 7 meters from the Set Top Box at an angle of up to 60 degrees.
The Remote Control will not operate if its path is blocked.
Country:
Press RIGHT/LEFT key to select your country of residence
Channel Search:
Press RIGHT or OK key to begin Automatic channel search
Once channel tuning is complete ,you can star watching TV programs.
Troubleshooting
Problem
Potential Reasons
What to do
No picture
Power isn’t connected
Connect the power
The power switch is not on
Switch on the power
Screen shows’ No Signal’
DVB-T cable not connected
Plug in the DVB-T cable
Aerial cable is faulty
Check aerial cable and connections
No sound from speaker
No or incorrect connection with audio cable
Connect the audio cable correctly
The program is a radio program
Press<TV/Radio>key to shift into TV mode
Remote Control is not
responding
The battery is exhausted
Change battery
Remote Control is not facing or close enough to the STB
Adjust the position of the Remote Control and move closer to the unit
Picture is breaking up
The signal is too weak
Check aerial cable and connections.
