1.2.1
Do not operate a TPMS receiver while driving. The company is exempt from all consequences because
of driver’s careless and improper operation.
1.2.2
The system adopts the wireless transmission of signals. In some special circumstances, interference or
erroneous methods of operation or installation method errors may cause weaker signal or its inability to
receive signals. If the insulation adhesive sticker of the windshield contains metal material, it will be likely
to affect reception conditions.If the tire pressure and temperature readings on the TPMS receiver are
displayed as “---”, this condition represents the receiver cannot receive signals emitted by the sensors.
Drive the vehicle away from the current location (nearby there may be signal interference) or drive the
vehicle to a tire shop to check.
1.2 Product Warning
02
English
1.2.4
Temporary resealing or re-inflation products containing internal sealants or propellants in any tire
assembly may adversely affect the operation of the sensor/transmitter. The product manufacturer does
not assume any liability as a result of these.
1.2.5
Do not leave the sensors in contact with chemicals, it may cause the sensors to fail.
1.2.3
If the battery status of the TPMS sensors inside the tire is low (because abnormal conditions continue to
occur, the battery may make the TPMS sensors continuously emit signals to warn the driver, so that
battery life is shorter than the normal life), Please go as soon as possible to the specified service stations
to confirm whether the TPMS Sensors need to be replaced.
