12
English
7. Driving Mode Menu
When the receiver is turned on, it is in Driving Mode. The screen displays tire pressure, tire temperature
and vehicle battery voltage in sequence. The tire pressure, tire temperature and vehicle battery voltage
are updated on the monitor every 5 seconds.
6.2.1 For travel, cargo or equipment trailers with a bumper pull A-frame hitch, place the repeater onto
the A-frame area of the trailer. Use self-tapping screws to fasten the repeater to one of the two
A-frame members with the “trailer side” black arrow facing the trailer and the power cable end
of the repeater facing the tow vehicle.
For 5th Wheels and gooseneck trailers select a location for the repeater near the house battery.
Use self-tapping screws to fasten the repeater with the “trailer side” black arrow facing the 5th
wheel or gooseneck trailer and the power cable end of the repeater facing the tow vehicle.
6.2.2 Mount the O-ring connectors on the repeater’s power cables to the proper trailer battery
terminals. The RED power cable is to be connected securely to the POSITIVE (+) battery
terminal. The BLACK power cable is to be connected to the NEGATIVE (-) battery terminal.
6.2.3 Use the cable ties to fasten the repeater power cable to the frame of the trailer or 5th wheel.
Avoid a loose repeater power cable by fastening the cable tightly to the frame.
7.1 Tire pressure Display: psi (Pressure units)
In the Driving Mode, the default value for tire pressure is set to 80 psi.
Press to show the pressure value only. When it shows tire pressure on the display, press
again to back to rotation display mode.
